The clamp stroke available must in a position to|be succesful of|have the ability to} accommodate the mould height or depth of mould and the required opening stroke wanted to eject high precision machining the plastic component. For free fall ejection, the daylight between platens have to be higher than mould height plus twice the depth of component to be ejected. It have to be noted that this dimension will need to be significantly higher if for instance, the component is removed by a robot, so as to permit access for the removal head. It is all the time clever to permit plenty of room for manoeuvre for later machine flexibility.
1 則留言 :
The clamp stroke available must in a position to|be succesful of|have the ability to} accommodate the mould height or depth of mould and the required opening stroke wanted to eject high precision machining the plastic component. For free fall ejection, the daylight between platens have to be higher than mould height plus twice the depth of component to be ejected. It have to be noted that this dimension will need to be significantly higher if for instance, the component is removed by a robot, so as to permit access for the removal head. It is all the time clever to permit plenty of room for manoeuvre for later machine flexibility.
張貼留言